Ortofon SPU Synergy GM
The SPU Synergy GM modernizes the classic SPU design with a number of optimizations designed for optimum compatibility and sonic purity.
The SPU Synergy features a wood-based housing and has a revised generator system which allows for a maximum output of 0.5 mV, relaxing the requirement for high gain transformer or active preamplification systems.
While still making use of a highly polished Nude Elliptical stylus, the stylus tip mass has been reduced significantly, resulting in reduced VTF and higher tracking ability.
We offer Special Repair Service for SPU Synergy GM »
|Output voltage at 1000 Hz, 5cm/sec.||0.5 mV|
|Channel balance at 1 kHz||< 1.5 dB|
|Channel separation at 1 kHz||> 23 dB|
|Channel separation at 15 kHz||> 15 dB|
|Frequency range at – 3dB||20-30.000 Hz|
|Frequency response||20-20.000 Hz ± 2 dB|
|Tracking ability at 315Hz at recommended tracking force *)||70 µm|
|Compliance, dynamic, lateral||8 µm/mN|
|Stylus type||Nude elliptical|
|Stylus tip radius||r/R 8/18 µm|
|Tracking force range||2.5-3.5 g (25-35 mN)|
|Tracking force, recommended||3.0 g (30 mN)|
|Internal impedance, DC resistance||2 Ohm|
|Recommended load impedance||10 – 50 Ohm|
|Cartridge body material||Grinded wood|
|Coilwire material||High Purity Copper (OFC)|
|Cartridge colour||Shiny Black|
|Cartridge weight||30 g|
|*) Typical value|